Industrial Exhaust Chambers

These floor model industrial exhaust chambers are designed for exhausting sanding dust, vapors and paint fumes. The dry exhaust filters trap the airborne overspray particles. The clean filtered air is then discharged through the exhaust duct system and into the atmosphere. These chambers are available in a wide range of sizes and designs to meet virtually any production requirements.

Industrial Exhaust Chambers have many uses from sanding booths to spray room applications.

    Request a Free Quote






     

    Exhaust System Features

    A tube-axial exhaust fan designed specifically for use in a paint spray industrial exhaust chambers powers the airflow through the booth and exhaust stack. All exhaust fans are of non-sparking construction. The motor drive and bearings are sealed from the air stream of the exhaust. Open drip proof (ODP) motors are provided with each unit.

    Construction Features and Quality Standards

    Chambers are constructed from heavy duty 18-gauge galvanized steel. Structural steel supports are used to add strength and rigidity as necessary.
    An optional control panel is available. Fire suppression systems are to be supplied by others.

    Exhaust Bench

    This exhaust bench provides a very practical method for removing hazardous and contaminated air generated by refinish, repair and other shop-related operations.

    Exhaust fans capable of 8,000 CFM. With 24” diameter blade, 2 HP, 3 phase open drip proof motor. Compact design saves valuable floor space. Heavy duty construction bench is fabricated with 18-guage galvanized steel panels. Promotes safety by exhausting harmful vapors and dust thereby reducing health hazards for personnel.

    Example Industrial Exhaust Chamber Drawings – click image to enlarge drawings

    Industrial Exhaust Chamber

    Our factory trained installation crew can get your new Industrial Exhaust Chamber installed correctly and quickly.

    This our specialty! You can rest assured that your new equipment will be operational in no time.

     

    Need more information about Industrial Exhaust Chambers?

    Request a Quote

    If you need help or have any questions you can always call 800-637-4027

    The sizes listed below are standard catalog sizes. We can custom build all of our finishing equipment to meet your needs. Call us at 800-637-4027.

    Industrial Exhaust Chambers Sizes

    One of the most important details not to be overlooked in a paint booth is the lighting. Our booths feature industry superior lighting with four-tube, 48″ long, 32-watt, fluorescent light fixtures. They are ETL listed (Class 1 Division 2) inside access and are supplied with multi-voltage ballasts to accept any voltage between 120V and 277V power. Bulbs are included.

     

    LED light fixtures are an option that can be easily integrated into any existing spray booth or fixture. To find out more about LED light fixtures, please click here.

    Options

     

    • Heated air replacement units and intake chambers
    • VFD to adjust air flows for automatic spray systems
    • Control panel and other electrical components can be added
    • Explosion-proof motor upgrade

    Our products meet and/or exceed all applicable OSHA and NFPA regulations. They are also ETL- Listed with purchase of optional control panel or heated air make up unit, which comes standard with a control panel.