No other paint system can generate a monthly utility savings of 35% or more.
Want to paint more cars in less time? With Velocity Cure you can. In-field testing proves that increased airflow cuts flashing time in half, raises paint surface temperature for baking several minutes faster, and slashes cure times by half or more.
Velocity Cure operates without adjustable blow nozzles or additional fans, this type of paint system minimizes air turbulence, helping ensure a cleaner paint job while reducing the need for sanding and buffing. During the Bake Cycle, Velocity Cure doesn’t just raise the booth’s temperature; it channels the heat where it’s needed onto the paint surface. Even waterborne paints cure faster with Velocity Cure because the booth’s indirect heat effectively extracts humidity from the air.
Complete Efficiency
The Velocity Cure System is engineered for efficiency. Variable frequency drives on the intake and exhaust fans optimize energy savings and enhance production abilities. Additionally, Velocity Cure uses three distinct operating modes to maximize the energy efficiency of the complete painting process.
Prep Cycle
The first operating mode is the Prep Cycle which optimizes booth conditions while final masking and tack off is performed. Using a variable frequency drive and make-up unit with a stainless steel heat exchanger, the Nova Verta system warms air and safely re-circulates it through the booth without exposing operators to the dangers of carbon monoxide.
No other paint system can provide a Prep Cycle that creates OSHA-mandated working conditions, heats the air, maintains air pressure, brings metal to the desired spray temperature, and generates monthly utility savings of 35% or more when compared to competitive systems in its class.
Spray Cycle
Once your prep work is finished, a single press of the Touch Screen Controller shifts the booth’s operation to the Spray Cycle. At this stage, a full stream of freshly heated air is provided into the booth’s cabin while maintaining a constant, ideal booth pressure is automatically maintained.
Beacause we use the Allen Bradley Touch Screen, Velocity Cure delivers unprecedented control. A touch of a button is all it takes to adjust air movement, change temperature, or alter the flash off time between coats. With the ability to increase airflow, Velocity Cure reduces time between coats by 5 to 10 minutes allowing more productive paint time through out the day.
Cure Cycle
After the painting process is complete another press of the Touch Screen Controller puts the booth into the Cure/Bake Cycle. The Bake Cycle, like the Prep Cycle, effectively re-circulates air, minimizing electricity usage and gas consumption. Once the desired temperature is reached, The Velocity Cure System automatically ramps up the air velocity maintaining temperature to expedite cure times on conventional and Waterborne Paints.
Total Quality
In addition to three distinct operating modes, tailored to reduce overall energy costs, Velocity Cure features the hallmarks of Nova Verta craftsmanship.
Booth Construction
With vinyl-coated, galvanized, dual penal construction, two inches of insulation, tubular steel center, door hardware, sealing material, and nut and bolt assembly, Nova Verta paint booths are built to last.
Lighting
Class 1, Division 2 light fixtures and color corrective tubes. Strategically placed throughout the interior of the booth, these fixtures are uniquely designed to eliminate shadowing and any interference with light output.
Pre-wired
Our factory pre-wiring expedites the installation of Nova’s paint systems. Color-coded and labeled wiring in Seal Tite conduit, and easy-to-read installation manuals minimize the need for electrical contractors and reduce set-up time and expense. Finger-safe control panel wiring ensures operator safety.
Controller
With the use of Allen-Bradley Touch Screens makes Velocity Cure incredibly easy to use. Instantly change parameters like temperature values and cure times with just a touch. Self-diagnostic screens indicate corrective measures to keep the booth operating for peak production. With built-in tracking and screen readouts for booth hours, cycle hours, and maintenance by type and date, Velocity Cure displays performance data to help optimize booth operation and minimize operating expense. With the Touch Screen, Velocity Cure puts total control at your fingertips.
Specifications
Length
- 27' - Standard
- 24', 29' or 31" - Optional
Width
- 13' 4-5/8" - Standard
- 14' 8" - Optional
Height
- 10' 9" - Standard
- 11' 8-3/8" - Optional
Controller
- Allen-Bradley, Touch Screen
- Rated for Class 1, Division 2, hazardous locations
Light Fixtures
- 4 tubes
- Rated for Class 1, Division 2 with inside access
Options
- Post filtration extractor
- 3 row tunnel pit
- 3 row easy pit
- Dry filter basement raises booth and equipment 16"
- Inside ramp
- 24, 29 or 31' - length option
- Drive-through door option
- Side exit door (additional or for drive-through)
- Optional 480 volt motors, 277 volt lighting and 120 volt controls and burner
- Electric roll-up door for automotive booth
- Electric side roll-up door
- 6-tube upgrade for 4-tube fixture
- Viewing window side wall
- Direct fired air make-up unit
- (note: ANSI standards do not permit a Prep Cycle with a re-circulating direct fired system)
|
Accessories 
