These floor model booths make efficient use of shop space and are designed for batch powder coating with no provisions for powder reclamation.
Interior Dimensions: 8'W x 7'H x 5'L
Exterior Dimensions: 8'4"W x 12'H x 7'8"L
Click here for the BOOTH DRAWING
HEAVY DUTY CONSTRUCTION
LOW MAINTENANCE
EASY TO ASSEMBLE
SPRAY-TO-WASTE DESIGN
RECIRCULATES SHOP AIR, NO AIR MAKEUP NEEDED
These floor model booths make efficient use of shop space and are designed for batch powder coating with no provisions for powder reclamation.
Air is drawn in through the open front of the spray booth, passes through the booth's working area into the filtered exhaust plenum. The air is filtered in three stages and discharged back into the room. One set of filters will be provided with each booth.
1st stage blanket style filter
2nd stage bag style filter
3rd (final) stage cartridge style filter
LIGHTING FEATURES
Bright full booth illumination is provided by four-tube, Class I, Division II, 48" long, 32-watt fluorescent light fixtures placed in the ceiling panels. All fixtures are UL listed and approved for their intended use and placement. The light tubes are not included with the fixtures.
CONSTRUCTION FEATURES AND QUALITY STANDARDS
All booth and plenum sections are fabricated from18-gauge prime galvanized steel. Structural steel is used to add strength and rigidity to booths as necessary. All panels and support members are precision punched on 6" center for easy nut-and-bolt assembly. Panel flanges are connected externally to provide smooth internal surfaces.
All hardware, installation instructions and sealants needed for the booth installation are included. The control panel and other electrical components may be purchased separately.
Manufacturer: Colmet
MPN: PB-0807
SKU: PB-0807
