A Non Heated Downdraft Paint Booth takes in fresh air from the upper levels of the shop through a pre-filter located in the plenum.
Interior Dimensions: 14'W x 9'H x 26'L
Exterior Dimensions: 15'W x 11'2"H x 26'4" L
Access Door: 1
Nominal Door Opening: 9'4"W x 8'10.5"H
Fluorescent Lights: 10
Click here for the BOOTH DRAWING You can use this booth with a Below Grade Pit or an OPTIONAL Mini Pit Basement (just 4 inches high)
A Non Heated Downdraft Paint Booth takes in fresh air from the upper levels of the shop through a pre-filter located in the plenum. Then down through a second series of filter media located in the paint booths ceiling. This allows for a cleaner paint job as the air is filtered twice before entering the paint booth. The filtered air is then drawn down and away from the vehicle through fiberglass exhaust filters in the pit located in the floor beneath the vehicle. This provides efficient over spray control that provides a much healthier workplace environment. An optional above ground Mini Pit basement exhaust chamber is available for installation without the hassle of concrete work.
This booth can also be equipped with a Heated air replacement unit. A cure cycle with or without recirculation can also be added to meet your shops requirements. It also available in a drive-through configuration.
Lighting Specifications
Bright full booth illumination is provided by ten four-tube, 48", 32-watt, fluorescent light fixtures in the booths hip panels and the side walls. Each is sealed behind clear, tempered safety glass and sealed with a rubber gasket. All fixtures are UL listed and approved for their intended use and placement. The light bulbs are not furnished with the fixtures.
Construction Features
All booths and Mini Pits are made with high quality 18-gauge galvanized steel. The product entry doors are fabricated with tube steel frames and then hung on structural channel jambs and then skinned with 18-gauge galvanized steel. Personnel access doors are provided they are pre-hung in heavy duty galvanized steel frames for fast and easy installation. Brixon latches are provided to secure each door. All hardware, nuts and bolts, filters and sealants needed for the booth assembly are included.
We offer several options such as Control Panels, White Powder Coating, Tri-fold Doors and Observation Windows; just to name a few, are available to customize this booth to your specifications. Need a BIGGER BOOTH just give us a call to customize one for you.
Optional Equipment
Tri Fold Doors with Windows $475.00
Powder Coating $1,779.00
Control Panel $1,099.00 Non Heated
Single Phase Non Heated $175.00
Drive Thru $1,000.00 Optional Mini Pit Basement
[Mini-Pit-26-SB] Mini-Pit 26' Low Profile Downdraft Exhaust Plenum + $10,000
[Mini-Pit-26-DT] Mini-Pit 26' Drive Thru Low Profile Downdraft Exhaust Plenum + $10,500
We can customize this or any other booth on our site just for you! 1-800-637-4027
Ships direct from manufacturer, you will be contacted with shipping costs. NO CRATING CHARGE LIKE THE OTHER GUYS!
Manufacturer: Colmet
SKU: N/A
