10'W x 8' 2"H x 3' 8"L Exhaust Chambers

Specifications

Heavy Duty Construction
Modern Design Allows Conversion to Paint Booth (with optional equipment)
Easy to Install!

These floor model exhaust chambers are designed for exhausting sanding dust, vapors and paint fumes. The dry exhaust filters trap the airborne over spray particles. The clean filtered air is then discharged through the exhaust duct system and into the atmosphere. These chambers are available in a wide range of sizes and designs to meet virtually any production requirements.

Heated air replacement units and intake chambers can be added as well as reduced airflows for automatic spray operations.

Exhaust System Features

A tube axial exhaust fan designed specifically for use in paint spray exhaust chambers powers the airflow through the booth and exhaust stack. All exhaust fans are of non-sparking construction. The motor drive and bearings are sealed from the air stream of the exhaust. Open drip proof (ODP) motors are provided with each unit.

Construction features and quality standards

Chambers are constructed from heavy duty 18-gauge galvanized steel. Structural steel supports are used to add strength and rigidity as necessary.

An optional control panel is available, fire suppression systems are to be supplied by others.

EZ exhaust bench

This exhaust bench provides a very practical method for removing hazardous and contaminated air generated by refinish, repair and other shop-related operations.

-Exhaust fans capable of 8,000 CFM. With 24' diameter blade, 2 hp, 3 phase open drip proof motor.
-Compact design saves valuable floor space.
-Heavy duty construction bench is fabricated with 18-gauge galvanized steel panels.
-Promotes shop safety by exhausting harmful vapors and dust thereby reducing health hazards for shop personnel.