Heated Modified Downdraft Paint Booth with a Spray and Cure Cycle. intakes fresh air from the outside and then is pulled through the heater where it is heated to the desired temperature.
Interior Dimensions: 14' W x 9' H x 28' L
Exterior Dimensions: 14' 4" W x 10' 10" H x 28' 4" L
Personnel Door: 1
Main Door Opening: 9' 4" W x 8' 10.5" H
Light Fixtures: 10
Click here for the BOOTH DRAWING Heated Modified Downdraft Paint Booth with a Spray and Cure Cycle. intakes fresh air from the outside and then is pulled through the heater where it is heated to the desired temperature. That can be easily set by the operator. The air is pulled down into and through a set of filters which are high quality booth diffusion media. To help insure the finest paint job. The filtered air is then drawn down and away from the objects being refinished through exhaust filters. Which are located at the opposite end of the paint booth.
This Modified Down Draft Booth is supplied with a Heated Air Makeup Unit for spraying and curing. Being able to cure your paint jobs will greatly increase your shop's productivity and bottom line. It's simple the more work you get through the shop the more profitable you will be.
Air Make Up System Heater:
- (1) Direct Fired Air Makeup AMU
- Vertical configuration with a 10 HP high static plug fan
- Includes VFD for precise booth balancing and pressure control
- Powder Coated White with a digital control panel
- Solenoid Valve
- Discharge Duct, 3 Way Deflector and Intake duct package for a 16' high roof.
Lighting Specifications
- (qty 10) four-tube, 48", 32-watt, fluorescent light fixtures located in the hip panels and side walls will provide superior lighting.
- The better the lighting in your booth the better the paint jobs can be.
- Each light fixture is sealed with a gasket behind clear, tempered safety glass.
- All light fixtures that are provided are UL listed. Bulbs are not included.
All of our Paint Booths are made of high quality 18-gauge galvanized steel. All product and personnel access doors are pre-hung in heavy duty galvanized steel frames for easy installation. Brixon safety latches are included for each paint booth door.
Exhaust System
- (1) 30" diameter tube-axial fan with a 3 HP, three-phase motor
- Exhaust Intake Duct Package: Enough exhaust duct for a 15' high roof (excluding offsets and roof flashing)
- All hardware, nuts and bolts, filters and sealants needed for the booth installation are included.
- Control Panel as well as other electrical components may be purchased separately.
Standard ATR-EZ Booth Cabin Features
- 18 Gauge Steel Galvanized Finish
- (9) Open Type Light Fixtures
- One S&G Rear Access Light Fixture
- Tube-Axial Exhaust Fan(s) with VFD
- Exhaust Duct Work Package(s) for 15' Roof Height (excluding offsets), Roof Flanges and Damper Cap.
- One Personnel Access Door with Window 30" W x 84" H
- Solid Back Configuration
- Solid Double Swing Vehicle Door 10' W x 9' H
Standard ATR-EH and EHC 812K Series AMU Features
- Intake 10HP High Static Plug Fan with a CFM range from 8,000 to 12,600
- 1.5 Million BTU Burner
- Powder-Coat White
- Digital Control Panel
- Solenoid Valve
- Discharge Duct 60"
- Intake Duct Package(s) for 15' Roof Height(excluding offsets) and Roof Flange(s)
Vertical or Horizontal Configuration
(Vertical includes Stand Horizontal includes Inlet Hood)
Optional Equipment
Tri Fold Doors with Windows + $475.00
Powder Coating + $1,779.00
Single Phase Heated + $1,575.00
Energy Saver Mode + $750.00 We can also customize these booths to fit your needs or call for a list of available options 1-800-637-4027
Ships direct from manufacturer, you will be contacted with shipping costs. NO CRATING CHARGE LIKE THE OTHER GUYS!
