3-Axis Paint Booth Lift
3-Axis Industrial Personnel lift used for prep, paint, wash and fabrication. OSHA/ANS Compliant
- X-Axis (Left/Right): Along a guide rail system (foot controlled)
- Y-Axis (In/Out-booth wall to platform): 9ft.-7in. (hand controlled)
- Retracted Lift Basket Dimension: 3 ft.
- Z-Axis (Up/Down-to platform): Up to 22 ft. (hand controlled)
- Lift Travel Speeds: X-Axis (variable): Up to 40 ft./min.
- Lift Travel Speeds: Y-Axis & Z-Axis: 15 ft./min.
- Independently controlled axis travel
- Our Standard Platform Dimensions: 48in. wide x 21in. deep
- Standard Platform capacity: 500lbs.
- Controls can be positioned at the base to raise or lower platform
- Standard Self-closing & latching entry/exit gates
- Auxiliary non-oiled air connection in lift platform
- Pneumatic/mechanical drive unit
- Features an In-line Filter/Regulator/Lubricator
Product Options
- Lift Controls can be mounted on the front or back wall of the platform
- Safety Contact Bumper: Shuts down all lift motion if bumper comes in contact with anything
- Optional Base steps: Used where standard platform steps interfere with product during operation. These are required with Contact Bumper
- Lift Lower Rail Scraper: Cleans excess over-spray from lower rail (required in side-draft booths)
- Over-Spray Filter Covers: Decrease over spray on mechanical drive components to prolong lift life and lessen mainrtenenace
- Optional Paint Pressure Pot Carrier: Designed to carry a single 5 gallon paint pressure pot. Attaches to the base of the lift and includes paint gun holder and 2 hose holders
- Roller Mount Spacers: Spaces lift away from booth wall for existing equipment clearance (usually lights)
- Base Bumpers: Hard rubber bumpers mounted on base of lift when 2 lifts operate on same rail
- Front Gate Platform: This allows access from the front of lift
- Safety Harness Attachment Points: Used when you have the Front Gate option
- Wall Mounted Auxiliary Flex Track: 1×4 in. flexible track that can carry breathing air and paint lines from top of mast to operator platform
- Lower Rail Guides: Used when heavy paint build-up is anticipated or in wash booths. Helps Guide lift travel on lower rail
Product Documents
Technical Details
- Model
A
B
C
D - LP2-610
6′
9′-3″
11′-6″
12′ - LP2-710
7′
10′-3″
12′-6″
13′ - LP2-810
8′
11′-3″
13′-6″
14′ - LP2-910
9′
12′-3″
14′-6″
15′ - LP2-1010
10′
13′-3″
15′-6″
16′ - LP2-1110
11′
14′-3″
16′-6″
17′ - LP2-1210
12′
15′-3″
17′-6″
18′ - LP2-1310
13′
16′-3″
18′-6″
19′ - LP2-1410
14′
17′-3″
19′-6″
20′ - LP2-1510
15′
18′-3″
20′-6″
21′ - LP2-1610
16′
19′-3″
21′-6″
22′ - LP2-1710
17′
20′-3″
22′-6″
23′ - LP2-1810
18′
21′-3″
23′-6″
24′ - LP2-1910
19′
22′-3″
24′-6″
25′ - LP2-2010
20′
23′-3″
25′-6″
26′ - LP2-2110
21′
24′-3″
26′-6″
27′ - LP2-2210
22′
25′-3″
27′-6″
28′
Applications
- Paint Finishing
- Surface Preparation (sanding, grinding)
- Washing
- Sanding
- Fabrication
- Fall Prevention / Safety
- Maintenance