11' 8"W x 10'H x 7'W Industrial Open Face Booth

These floor model booths are designed for both batch type and line style production systems.

Interior Dimensions: 11'8"W x 10'H x 7'L
Exterior Dimensions: 12'W x 10'2"H x 10'8"L
Lights (qty): 2
Filters (qty): 30
Fan Diameter: 30"
Fan Specs: 5 HP with 15,000 SCFM @ 1/2" SP
Shipping Weight: 2,500

 

Click here for the BOOTH DRAWING

Heavy duty construction
Batch and automated production designs
Easy to install
ETL Certification Available

These floor model booths are designed for both batch type and line style production systems. Clean air is drawn in through the open front, across the parts being painted and exhausted through a filter bank in the rear of the booth. The fiberglass exhaust filters trap the airborne over spray particles before the filtered air is discharged through the exhaust duct system and into the atmosphere. The booths are available in a wide range of sizes and designs to meet practically any production requirements.

Conveyor slots can be as much as 25% of the booth open front area, without requiring an additional exhaust fan.

We can customize these spray booths to meet your requirements. Heated air replacement units and intake chambers can be added as well as reduce air flows for automatic spray operations.

Lighting features

Paint Booth lighting is provided by four-tube, 48" long, 32-watt, fluorescent light fixtures. Each is mounted behind clear tempered safety glass and sealed with a rubber gasket. All fixtures are UL listed and approved for their intended use and placement. Bulbs not Included..

Exhaust system features

A tube-axial exhaust fan designed specifically for use in paint spray exhaust chambers powers the airflow through the booth and exhaust stack.

All exhaust fans have non-sparking blades. The motor drive and bearings are sealed from the air stream of the exhaust. Open drip proof motors are provided with each unit with a drive guard assembly.

Construction features and quality standards

Our Paint Booths are constructed from high quality 18-gauge galvanized steel. Structural steel is used to add strength and rigidity to chambers as necessary. All panels and support members are precision punched for easy nut and bolt installation. Panel flanges are connected externally to provide smooth internal surfaces.

All spray booth packages include detailed installation instructions, nuts, bolts, hardware and sealants necessary for assembly.